Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
General Forum Information
Off Topic
V2 Feedback problems Help!!!!!!! please!!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Synergy/MTS Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="RD/MAN" data-source="post: 5089" data-attributes="member: 61"><p>First check your settings. Because the V2 has a Master level control you should always run this much higher than the level control on the preamp, especially at gig volume. The preamp levels should never get abpve 12 o'clock, otherwise your really starting to push the preamp too hard which will cause the preamp tubes to start feeding back uncontrollably. So, a recommended setting would be preamp level 10 o'clock then set the Master volume where you need it to get the desired volume. It no problem to have the Master turned up high to get the volume you need, because the Master controls the power amp where you want to get the volume from anyway.</p><p></p><p>Also, If you're just getting feedback at higher volumes and not at lower volumes than I would also suggest cutting the Gain back just a bit. The V2 tube preamp is extremely high gain and when you turn the volume up you are also increasing the distortion level, so cut it back a bit at high volumes.</p><p></p><p>If you do want a ton of distortion than I would definitely suggest a gate in the effects loop. The ISP decimator is great one that I would recommend. hope this helps and let me know if you have any other questions.</p><p></p><p>Thanks!</p><p>RD/MAN</p></blockquote><p></p>
[QUOTE="RD/MAN, post: 5089, member: 61"] First check your settings. Because the V2 has a Master level control you should always run this much higher than the level control on the preamp, especially at gig volume. The preamp levels should never get abpve 12 o'clock, otherwise your really starting to push the preamp too hard which will cause the preamp tubes to start feeding back uncontrollably. So, a recommended setting would be preamp level 10 o'clock then set the Master volume where you need it to get the desired volume. It no problem to have the Master turned up high to get the volume you need, because the Master controls the power amp where you want to get the volume from anyway. Also, If you're just getting feedback at higher volumes and not at lower volumes than I would also suggest cutting the Gain back just a bit. The V2 tube preamp is extremely high gain and when you turn the volume up you are also increasing the distortion level, so cut it back a bit at high volumes. If you do want a ton of distortion than I would definitely suggest a gate in the effects loop. The ISP decimator is great one that I would recommend. hope this helps and let me know if you have any other questions. Thanks! RD/MAN [/QUOTE]
Verification
Post reply
General Forum Information
Off Topic
V2 Feedback problems Help!!!!!!! please!!!
Top