A little help with wiring

Synergy/MTS Forum

Help Support Synergy/MTS Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GuitarGod87

Well-known member
Joined
Mar 10, 2011
Messages
206
Reaction score
0
Location
Port St. Lucie, FL
Ok so I'm installing two V30's into my cabinet. But the problem is with the extra wiring from the input I'm not sure on how to wire the speakers now. Ive always used a simple input and went through the series. Do i just hook up Positive to positive and negative to negative with the two V30's?
 
Need a little info from you in order to assist:

- What's the cab or what's the options on the jack plate?
- That is the ohm rating on the V30?
- What is your desired ohm rating or wiring method you'd like to have in the cab?
 
Assuming your V30's are the same ohm rating as what you're replacing (they need to be), it's just as simple as replacing all connections exactly as they are now.
 
yea I figured it out. What happened was i traded two 12's for a delay padal here on the forum and I forgot how the speakers were connected. It's been ages since I connected speakers so I totally forgot. I just went series since the top two speakers were already connected to the jacks so the signal was already returning to the jack from the top speakers.
 
Top