wth?

Discussion for both Egnater & Randall modular amps

Moderators: guitarguy510, ned

Post Reply
suphuckers
Lynch Box
Posts: 689
Joined: Tue Aug 05, 2014 8:32 pm
Location: Under a Tree Near the Stage Coach Inn Museum

wth?

Post by suphuckers » Sun Aug 31, 2014 9:52 am

So for reasons I don't need to go into, I had my rm100 out of the chassis. While I was in there I noticed some stuff. My head has an original mfg date of 2004, but the main board in there says Egnater mod100, and it has a date of 2005. Anybody shed some light on this? Somebody mod this thing maybe? There's also a 2nd serial stamped over top of the original serial on the back.

Thanks!

suphuckers
Lynch Box
Posts: 689
Joined: Tue Aug 05, 2014 8:32 pm
Location: Under a Tree Near the Stage Coach Inn Museum

Post by suphuckers » Sun Aug 31, 2014 8:44 pm

I guess what I'm asking (and trying to figure out is)... Does the stock RM100 main board have "Egnater MOD100" stamped on it normally? Or is this maybe an upgraded main board that someone put in there? It's just weird to me that the date stamp on the frame is 2004, and the board itself has 2005 stamped on it.

Anyone?

Mattfig
Donating Member
Posts: 5686
Joined: Tue Jun 22, 2010 9:12 pm
Location: Hurtling through space on a wet rock.
Contact:

Post by Mattfig » Sun Aug 31, 2014 9:06 pm

I haven't the slightest idea....Not ignoring your post, just don't know...
Matt Fig -
MotorCity Mods
www.motorcitymods.com

Kemper Profiles -
www.mattfig.com

suphuckers
Lynch Box
Posts: 689
Joined: Tue Aug 05, 2014 8:32 pm
Location: Under a Tree Near the Stage Coach Inn Museum

Post by suphuckers » Sun Aug 31, 2014 9:12 pm

well its really weird looking to me. All the other boards say rm100 and randall on them except the mainboard.

warlok
RM100
Posts: 393
Joined: Thu Dec 09, 2010 1:07 am
Location: AZ

Post by warlok » Sun Aug 31, 2014 10:03 pm

There's one in here http://mtsforum.grailtone.com/viewtopic ... 5a3aa88803 that says it's an RM50 but the pics show the boards as MOD50. Even has dates of 2003 and 2005 on each board. So I'd guess what you're looking at is normal..
Jackson, Charvel, Ibanez. RM100, RM50 (both Foglifted), JF Erect, MarkX, '59RR, XTC, Stock KH1 & 1086. Carvin 4x12 with G12T-75's/V30's X-pattern, Randall R212CS with older Eminence OEM's

JKD
Donating Member
Posts: 4991
Joined: Tue Apr 03, 2007 1:25 am
Location: NorCal

Post by JKD » Sun Aug 31, 2014 10:35 pm

Yip, that's my RM50...I've had several open as well as RM100s, all of them had one or more Egnater labelled boards in them.
Synergy - HBE,SLO,VH4,TDLX,Plexi, ENGL,OS,BB/BE, AC
Salvation-Deadplate, Spawn, MarkUS, Dual Salvado+JJ Dirt+Terrier
JF-Dual Erect
Gigmods - Mark
Hilly-Snorkeler
Egnater -COD, ERECT, VX
Randall - Brahma,Scary, Grail, SuperV

blacksun
RM100
Posts: 397
Joined: Sun Oct 02, 2011 5:15 am
Location: Wherever there's a guitar shop

Post by blacksun » Sun Aug 31, 2014 11:58 pm

Have you by any chance tried to feed it with an eggie dual ch module?
Good deals with; bduersch, mikegyver, Steven Latch, frodgemo, krok, mr.air, Petrucci, guitarzan, list goes on..

suphuckers
Lynch Box
Posts: 689
Joined: Tue Aug 05, 2014 8:32 pm
Location: Under a Tree Near the Stage Coach Inn Museum

Post by suphuckers » Mon Sep 01, 2014 6:35 am

Hmmm Good info. Thanks Guys!

It's probably just normal then.

No I haven't tried a dual mod, but that's what I was wondering... If it had been modified for dual mod's. My guess after this is gonna be no.

bruce egnater
Bruce Almighty
Posts: 495
Joined: Thu Aug 31, 2006 9:18 pm
Location: Michigan
Contact:

Post by bruce egnater » Mon Sep 01, 2014 9:22 pm

Can you take a photo of the midi board? That will tell if is modified for dual modules. You can email it to me begnater@aol.com if you wish.

Post Reply