Posted: Fri Jan 19, 2018 4:06 pm Post subject: Voodoo modded treadplate module
Hello everyone! I havenít been into MTS in quite a while. I have an RM 50 and RM 100. I had the treadplate modded a long time ago from voodoo amps. Itís gain is way over the top. The bottom end is a bit flabby and not defined. Iím looking to pull some of the gain and tighten the low end a but. Maybe get rid of some lows. First off there a small potentiometer on the board soldered in place of a resistor. Not sure what it adjusts. Anyone have an idea on where to start on the board to drop the gain down a bit? I like my ultra xl I modded myself but like I said Iíve not messed with these modules in years and am rusty on where to start with the circuit. Thanks for any help!
I also have a voodoo modded treadplate. That little pot is actually the gain adjustment. It's pretty sensitive. I did back mine down a little bit and it tightened up the bottom end. Put a little mark on the pot where it's set now and then try taking down a smidge. _________________ Syn1, MOD50, M4, Hilly's RM100 modded to dual, RM4 modded to dual channel. G-Major 2, Mesa 20/20, Fryette Powerstation, Friedman Smallbox Combo, 1979 Marshall JMP 50 modded to BE/HBE by Friedman. Tons of modules.
Sounds good. Iíll try the mini pot. Its in the cap spot next to R11 on the board. Thereís a 472MPW cap in C3.
I know I made a bunch of notes on the mods for the modules I have but canít find them. I got excited seeing the synergy modules. I donít understand why modular tube amps didnít really take off like crazy. Itís a great idea although I think the modded modules I have from different designers all sound the same. Iím hoping the synergynones realynhave the character and Sound of the amps they are mimicking.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum