Syn 1 volume drop

Synergy/MTS Forum

Help Support Synergy/MTS Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rickgk

Well-known member
Joined
Mar 29, 2006
Messages
135
Reaction score
0
Hi,

I was using my syn 1 today and all a sudden the volume dropped drastically.
I've checked my cables, and tried all of my modules.
I notice slightly more volume on channel 1 but it's nowhere near what it was or should be.

I've tested in four different amp returns, and also directly into my Fryette Powerstation line in as a Poweramp.

Any ideas?
 
The single tube in the syn 1 itself? I did the chopstick tap test and it didn’t pop or crackle, I guess it’s possible it has died, but it looks ok.
I tried all three of my modules and they all had the same problem so I doubt it’s an issue with the modules.
 
Try to switch the tubes on the SYN1, just to rule that out.

If those are ok, i would shoot a mail to Synergy. They are usually very responsive.
 
I have one of the original SYN 1's that I got directly from Synergy and I had a similar situation where my SYN 1 would cut out. I sent it to Synergy for repair and it is great now. I would also recommend contacting Synergy.
 
Top