sevenstring
New member
- Joined
- Mar 20, 2007
- Messages
- 2
- Reaction score
- 0
Hi all!
I purchased an RG100SC a few days ago and, overall, I am still very green with amplifiers (only played direct through PA so far).
So, I immediately plugged it at a rehearsal with my band and, needless to say, the sound was amazing, but, while using the drive channel, I came upon some very nasty feedback (in the low-mids, as far as i can define it). I tried to scoop the mids, but the problem persisted. Some details about the setup: I play a sevenstring guitar with DiMarzio Evolution7 in the bridge; the amp was placed on the floor, with its back at about 30 cm (12 inches) away from the wall; Gains 1/2 were little below 12 o'clock, drive channel level was at 12 o'clock and so was master volume.
Any ideas about dealing with this problem?
Because the drive channel is really awsome, and I would like to use it!
I purchased an RG100SC a few days ago and, overall, I am still very green with amplifiers (only played direct through PA so far).
So, I immediately plugged it at a rehearsal with my band and, needless to say, the sound was amazing, but, while using the drive channel, I came upon some very nasty feedback (in the low-mids, as far as i can define it). I tried to scoop the mids, but the problem persisted. Some details about the setup: I play a sevenstring guitar with DiMarzio Evolution7 in the bridge; the amp was placed on the floor, with its back at about 30 cm (12 inches) away from the wall; Gains 1/2 were little below 12 o'clock, drive channel level was at 12 o'clock and so was master volume.
Any ideas about dealing with this problem?
Because the drive channel is really awsome, and I would like to use it!