PSA regarding tubes

Discussion area for Jaded Faith custom modules

Moderator: Jaded Faith

davetheslave
RM100
Posts: 240
Joined: Sat Apr 09, 2011 10:11 pm
Location: West Oz

Post by davetheslave » Mon Mar 24, 2014 9:52 pm

Thanks for posting this Rob. I've been having heaps of the said problems with my LoneClean and even though I had been changing the tubes I had consistently been putting one of the sovteks in V2. Once I changed it to one of the better tubes in V2 it's gone back to being a gig worthy module.
No such thing as too many,
Deals:BigBrewtus,Alowerdeep

MarcoR
Donating Member
Posts: 897
Joined: Wed May 02, 2007 10:47 am
Location: Frederick, MD

Post by MarcoR » Fri Mar 13, 2015 6:53 am

I had a new JJ HG+ from Valve Queen in the V2 position go out last night...
I thought the JJ was safe there but apparently not? When the Mullards died there, it was just a huge drop in volume but last night I was jamming and it was sounding off the hook and then dead instantly! No sound... Never had it happen like that before.

I popped out the module, pulled the JJ in V2 and tested it in the Orange VT1000 and sure enough... it didn't get halfway through the test and came back with a big FAIL. :?
Synergy: SYN2, Friedman DS, HBE
Self Modded: Egnater B'Man, SL2X
Amps: VHT 2/50/2, RM50, Landry LS100 G3, Splawn Quick Rod, Marshall 6100LM

suphuckers
Lynch Box
Posts: 689
Joined: Tue Aug 05, 2014 8:32 pm
Location: Under a Tree Near the Stage Coach Inn Museum

Post by suphuckers » Fri Mar 13, 2015 7:07 am

I've had some JJ's fail there also Marco. I think the point was that some other tubes fail much faster/sooner. Some of them immediately. No tube will last forever. Any tube can fail at any time in any socket.
"Dude, you're easily the gnarliest guy I've seen around here in years"

59' Sears Wish Book Cowboy Guitar w/ Christmas Box, AXL Acoustic Guitar Pickup w/ E-pin Jack, Marshall MS-2 1/2 Stack Classic. ohhh, and some modules.

Jaded Faith
Moderator
Posts: 2706
Joined: Sat Jul 14, 2007 10:25 pm
Location: Hamilton, NJ
Contact:

Post by Jaded Faith » Fri Mar 13, 2015 7:12 am

I wouldn't worry about that one Marco, tubes can (and do) fail. Laura is great and her tubes are excellent. It just failed before it's time. I stock and use more JJ preamp tubes than any other and they are extremely reliable, quiet and consistently the highest gain on average.

As a side note story, I just had an amp come back into the shop Tuesday that was picked up last Friday. One of the brand new Sovtek 12AX7's had a small base pin fracture that went unnoticed until he drove it home and fired it up. The crack became a vacuum leak and the tube died. It happens.
www.jadedfaithmods.com
https://www.facebook.com/JadedFaithMods
Email: info@jadedfaithmods.com
Authorized Service Center for US Music and Egnater
Authorized Reseller for Celestion, Scumback & Mercury Magnetics

MarcoR
Donating Member
Posts: 897
Joined: Wed May 02, 2007 10:47 am
Location: Frederick, MD

Post by MarcoR » Fri Mar 13, 2015 7:43 am

I had just put the tube in the night before so it was fresh from VQ. This batch was the best batch of tubes I think I've ever ordered; I tested them all when I got them and they all tested great and better than anything I had on hand.

The good news is I was going to put that one in my VHT 2502 and I'm glad I didn't! That's a lot of screws to get the top off! :lol:
Synergy: SYN2, Friedman DS, HBE
Self Modded: Egnater B'Man, SL2X
Amps: VHT 2/50/2, RM50, Landry LS100 G3, Splawn Quick Rod, Marshall 6100LM

Yatagan
Donating Member
Posts: 71
Joined: Mon Jul 20, 2015 1:49 pm
Location: NORWAY

Post by Yatagan » Thu Jul 23, 2015 6:54 pm

Rob

In general, are there a specific type of JJ's you typically would recommend for the modules? Are there types that will give a varmer tone than others?

Finally would the Preferred Series 7025 / 12AX7 tubes improve or alter the sound and/ or sensitivity significantly?
Egnater M4's, MOD50's:
Modules: EG, SM, JF, MM, FM, GM and R.
Marshall EL34 50/50 and 9002: EV12L's
Deals: bnorton4, mfred, blacksun, audiomidijace, JKD, LiquidSky, LunatiBSW, hmic10, Shreddy.Krueger6, webrthomson

Post Reply