Solve this MTS Module mystery?

Synergy/MTS Forum

Help Support Synergy/MTS Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ricey

Well-known member
Joined
Jan 10, 2009
Messages
141
Reaction score
0
I just scored a Recto module on ebay. It works fine in channel 1 and 2 in my RM100 combo, but not in channel 3. I have 7 other modules and they all work in channel 3 on that amp. I also have an RM50 combo and the Recto works fine in both channels on that amp.

Any ideas as to what is going on?

Any advice would be appreciated.
 
Some modules are a tiny bit shallower than others. Could be that the row of docks (for lack of the correct term) in your amp is slightly askew and the pins on the module in question don't quite reach far enough to make a good connection in that last slot.
 
Thanks for your help! I just found this same topic with quite a detailed discussion over on the module board. I should have checked there first, but I was focusing on the amp, not the module, since it was just the one slot on the amp that was not working.

http://mtsforum.grailtone.com/viewtopic.php?p=154569#154569

Please post any additional advice to the other thread.
 
Top