guitarguy510
Well-known member
Hey guys,
I am switching over to the rack-version RM4 and RT2/50 setup from my RM100 setup so I can use 4 modules (collecting them is addictive!) as I just picked up the 1086 and I already have the Blackface, Recto and XTC. The power tubes have maybe 20 hours on them tops. The amp is in excellent condition, it was bought as a factory "blem" model because the right side (if facing the amp) got bumped and pushed the side out during shipping. It came to me with the side pushed out like that and the piece of wood that holds the tube bar on the back is chipped. All you need to do to fix the tube bar (if you really need it, I don't gig right now so it wasn't an issue for me) is to remove the little block of wood and replace it with another little cube of wood and screw the bar back in (I do still have the bar and screws, too). The side issue doesn't affect the sound at all, just a physical blem and you can only see it if you are comparing the left side to the right side.
If you don't mind an asthetic issue, there are no other problems with this amp! It has the stock Ruby 6L6 tubes, like I said very low hours. No modules included, I'm going to be picking up my RT2/50 soon and I am using the modules with my RM4. I'm looking to get $650 incl. shipping (verified payment via Paypal only though), so this could be your chance to pick one up cheap, or even get it as a backup! 8) I'll post some up close-up pictures of it tonight for anyone interested. It's going to go up to eBay soon, so if you want it, speak now! :wink: Also, if you are local to the PA (Philly) or NJ area, local pickup/meeting is available.
http://www.personal.psu.edu/users/m/f/mfg140/Randall%20RM100-S/Randall_RM-100%20002.jpg
Highlight the picture and place your cursor in the middle, when the little box appears in the lower right hand corner click it to see the blow up image... you can compare the two sides that way, but like I said I'll take some better ones tonight for you guys!
I am switching over to the rack-version RM4 and RT2/50 setup from my RM100 setup so I can use 4 modules (collecting them is addictive!) as I just picked up the 1086 and I already have the Blackface, Recto and XTC. The power tubes have maybe 20 hours on them tops. The amp is in excellent condition, it was bought as a factory "blem" model because the right side (if facing the amp) got bumped and pushed the side out during shipping. It came to me with the side pushed out like that and the piece of wood that holds the tube bar on the back is chipped. All you need to do to fix the tube bar (if you really need it, I don't gig right now so it wasn't an issue for me) is to remove the little block of wood and replace it with another little cube of wood and screw the bar back in (I do still have the bar and screws, too). The side issue doesn't affect the sound at all, just a physical blem and you can only see it if you are comparing the left side to the right side.
If you don't mind an asthetic issue, there are no other problems with this amp! It has the stock Ruby 6L6 tubes, like I said very low hours. No modules included, I'm going to be picking up my RT2/50 soon and I am using the modules with my RM4. I'm looking to get $650 incl. shipping (verified payment via Paypal only though), so this could be your chance to pick one up cheap, or even get it as a backup! 8) I'll post some up close-up pictures of it tonight for anyone interested. It's going to go up to eBay soon, so if you want it, speak now! :wink: Also, if you are local to the PA (Philly) or NJ area, local pickup/meeting is available.
http://www.personal.psu.edu/users/m/f/mfg140/Randall%20RM100-S/Randall_RM-100%20002.jpg
Highlight the picture and place your cursor in the middle, when the little box appears in the lower right hand corner click it to see the blow up image... you can compare the two sides that way, but like I said I'll take some better ones tonight for you guys!