isolated1523
Well-known member
***edited for update***
So i'm out of ways to troubleshoot this. My RM4 acts like my MidiMoose midi pedal isnt even there.
When I plug the Randall RF4 footswitch straight to the RM4 with the 7-pin cable, the phantom power works fine, and all the modules change and can be programmed however I desire.
Also, when I then connect the Midi Thru from my RM4 to my GSP, the GSP will correctly change as assigned.
When I use the MidiMoose (which can only use a 5-pin cable), the RM4 will not respond at all. However, the GSP still receives the signal from the "midi through" of the RM4 and changes correctly. Further, this MidiMoose and GSP setup will work FINE on my RM100 head.
I've opened the RM4 and tried all pins "on" (CH1), all pins down (CH16), and various configurations of the phantom power switches. None of these settings affected the operation of the Randall footswitch, and also didnt help get the MidiMoose working.
Does the Randall footswitch transmit on "omni", or is there something wrong with the pins on my midi circuit board???
Pullin my hair out here. lol
So i'm out of ways to troubleshoot this. My RM4 acts like my MidiMoose midi pedal isnt even there.
When I plug the Randall RF4 footswitch straight to the RM4 with the 7-pin cable, the phantom power works fine, and all the modules change and can be programmed however I desire.
Also, when I then connect the Midi Thru from my RM4 to my GSP, the GSP will correctly change as assigned.
When I use the MidiMoose (which can only use a 5-pin cable), the RM4 will not respond at all. However, the GSP still receives the signal from the "midi through" of the RM4 and changes correctly. Further, this MidiMoose and GSP setup will work FINE on my RM100 head.
I've opened the RM4 and tried all pins "on" (CH1), all pins down (CH16), and various configurations of the phantom power switches. None of these settings affected the operation of the Randall footswitch, and also didnt help get the MidiMoose working.
Does the Randall footswitch transmit on "omni", or is there something wrong with the pins on my midi circuit board???
Pullin my hair out here. lol