Search results

Im looking for a way to retrofit reverb into my RM20bp and need some feedback on my crazy ideas before I spend any money. So far the my solution is to hook up a reverb pedal to the FX loop with a ebtech line shifter and use the DC from the fan to power it. Will this work?

Can anyone tell me if the boost is in fact a tube boost and what tube is used?

1. The 12at7 seems like an obvious choice. Ill try it 3. I believe its the rm50 boost tat maxes the volume. My guess is that the fx loop tube (V2) is the tube boost. A 12at7 could be a good choice there too. 4. as anyone sucessfully powered fx from this? 5. So theoretical I could record the...

Hi, Ive searched the internet extensively and still have a few question for experienced RM20 owners. 1. The phase inverter socket is labelled 12ax7. Is it recommended and what would be the effect of putting a 12at7 in there? 2. Is the FX loop -10db for stomp boxes or +4 for rack units? 3...

Randall sent some thumbscews with the blank plates. Now I only use my trusty blackface module

I had a Gmajor and it died twice on me. The last time I had it fixed then sold it. I think these units have spotty reliabilty. My old Digitech TSR-24 is 3 times older and hasnt missed a beat

When Im not using my wireless I use a Canare GS6 with G+h ends. It sounds great and is trouble free.

Try calling them. I bought some blank faceplates from them with some thumb screws and they weren't even listed.

Recorded my CD with with an RM100 loaded with 1086, ultra and blckface.http://www.youtube.com/watch?v=MlNtPSx2URo This was recorded using the mic eliminator http://www.youtube.com/watch?v=u2sDPFhfL-4 At this point I only have a blackface module and I'm using a Danelectro Transparent Overdrive...

JJ's . They are the only ones I know that will work.

These two fuses had me stumped before too. It seems like every time I take the amp out of its chassis some of the covering gets pulled out. Ive resorted to cutting the loose bits off.

Currently im using a pair of 6v6's. When turned up the tubes compress the sound allot. I usually set it just before the compression begins. I also bias them on the cool side so I guess im running about 25-30 watts.

It worked! I had a great night and no problems with the RM100. Heres Proof :) Alittle blues http://www.youtube.com/watch?v=F1Kd9H32WUA http://www.youtube.com/watch?v=K_MyJMUVbLQ

I will use the amp for my gig. I always have my Crate powerblock nearby if I have any trouble.

The last time I had this amp break down I had to take it to a tech. It seems he had left a 2" long stick of solder inside the amp to bounce around freely. I removed the stick of solder and the amp has be fine ever since. I can only speculate how this could cause my trouble but it is the only...

Ive cleaned the contact on the module and the amp still cuts out. Ive taken the amp apart to have a visual and it shows nothing obvious. I am running out of ideas.

Alas I live in a small secluded town. The nearest city (Vancouver) doesn't even have a store that stocks MTS.

I did move the module into another slot and it was the same. The tubes in the module were swapped and made no difference. The contact that the module could be the problem. I inspected it and it looks slightly corroded. It is also a very old module. What can I do to clean the contacts? Would...

I only have one module so I cant eliminate it as being the possible problem. I have tried other guitar and speaker cables also. I also plunged directly into the series fx return and got sound so I suppose that eliminates the power section as being the problem. Ive got a gig at a hall on Saturday...

Been having some trouble with my RM100. It cuts out when I play the strings hard. I have tried to troubleshoot the problem by swapping tubes and I still have the problem. I made a short video to better show the problem. It seems that when I put it into standby and then back to play the sound...